INFICON CU1000 Control unit - Manual (Page 9)

Description 9
4 Description
4.1 Construction of the unit
1 - Touch display
Display that lets you read and enter data
2 - Status LED
The Status LED indicates the status of the control unit.
3 - Reset key
Key to rest the control unit (can be operated with touch pin)
Information The MS module is not reset.
4 - USB connection
Connection for USB stick (FAT formatted)
Information The connection is suitable only for USB sticks.
5 - Mounting holes
Holes for mounting the control unit
Fig: 1 Front view
Status LED illuminated Control unit operates normally
Status LED flashing Display is set to power saving mode