INFICON 2020ppbPRO Portable Photoionization Detector - Manual (Page 9)

ISP-074-576-P1D 3
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Subpart B, Class B of Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at their expense.
The 2020ppbPRO Intrinsic Safety (I/S) Notice
THE 2020ppbPRO IS CLASSIFIED FOR USE IN CLASS I, DIVISION 1, GROUPS
A, B, C, D HAZARDOUS LOCATIONS. T4 (135°C) RATING.
It has been listed by MET Laboratories, Inc., to comply with Underwriters
Laboratories® Inc. UL® 913 Standard for Intrinsically Safe Apparatus and
Associated Apparatus for use in Class I, Division 1, Groups A, B, C, D Hazardous
(Classified) Locations, Sixth Edition when powered by MX700010 or MX700011
Battery Pack. THE 2020ppbPRO IS NOT INTENDED TO DETECT COMBUSTIBLE
LEVELS OF GASES. THE 2020ppbPRO IS CLASSIFIED FOR USE IN
ATMOSPHERES CONTAINING COMBUSTIBLE LEVELS OF GASES.
These accessories are for use with the 2020ppbPRO in a hazardous location:
MX350006 Calibration Regulator
MX350007 Wrist Strap
MX750011 Belt-Clip Holster
MX700260 Carrying Case
M1760148 User’s Reference Card
MX380305 Long Sample Probe
MX395001 Short Sample Probe
A1790500 Tube Holder
F1760160 Dräger Tube, Carbon filter
F1760162 Dräger Tube, Intake sample conditioner
Do not use any other accessories with the 2020ppbPRO in a hazardous location.
Substitution of components may affect safety rating.