INFICON BCG450 ATM to Ultra-High Vacuum Triple Gauge - Manual (Page 2)

2
tina40e1-b (2011-04)
In all communications with INFICON, please specify the information on the product
nameplate. For convenient reference copy that information into the space provided
below.
Model:
PN:
SN:
V W
INFICON AG, LI-9496 Balzers
This document applies to products with the following part numbers:
BCG450 (without display)
353-550 (vacuum connection DN 25 ISO-KF)
353-551 (vacuum connection DN 40 CF-R)
353-561 (vacuum connection DN 25 ISO-KF, with baffle)
BCG450 (with display)
353-552 (vacuum connection DN 25 ISO-KF)
353-553 (vacuum connection DN 40 CF-R)
BCG450-SD (with DeviceNet interface and switching functions)
353-557 (vacuum connection DN 25 ISO-KF)
353-558 (vacuum connection DN 40 CF-R)
353-562 (vacuum connection DN 25 ISO-KF, with baffle)
BCG450-SP (with Profibus interface and switching functions)
353-554 (vacuum connection DN 25 ISO-KF)
353-556 (vacuum connection DN 40 CF-R)
The part number (PN) can be taken from the product nameplate.
If not indicated otherwise in the legends, the illustrations in this docu-
ment correspond to gauge with part number 353-552. They apply to the
other gauges by analogy.
All BCG450 versions are shipped with an instruction sheet ( → [8]). BCG450-SD
and BCG450-SP come with a supplementary instruction sheet describing the field-
bus interfaces and the switching functions (
→ [9]).
We reserve the right to make technical changes without prior notice.
The BCG450, BCG450-SD and BCG450-SP gauges have been designed for
vacuum measurement of gases in the pressure range 5×10
-10 … 1500 mbar.
They must not be used for measuring flammable or combustible gases in mixtures
containing oxidants (e.g. atmospheric oxygen) within the explosion range.
The gauges can be operated in connection with the INFICON Vacuum Gauge
Controller VGC401, VGC402 or VGC403 or with other control devices.
Product Identification
Validity
Intended Use