INFICON PEG100-D Medium to Ultra-High Vacuum Gauge - Manual (Page 2)

General Note
The right of alterations in the design and the technical
data is reserved.
The illustrations are not binding.
Contents
Page
1 Penning Gauge PEG100-D . . . . . . . . . . . . . 3
1.1 DeviceNet interface . . . . . . . . . . . . . . . . . . . . 3
1.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Starting-up of the PEG100-D . . . . . . . . . . . . 4
2.1 Baudrate and Address Switch . . . . . . . . . . . . 4
2.1.1 Baudrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1.2 Address Setting . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 MNS - LED . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Object Structure . . . . . . . . . . . . . . . . . . . . . 5
3.1 Identity Object (Class Code 01
hex
) . . . . . . . . . 5
3.2 Device Manager(DM) Object . . . . . . . . . . . . 5
(Class Code 64
hex
)
3.3 Assembly Objects (Class Code 04
hex
) . . . . . . 6
3.3.1 Output Assemblies . . . . . . . . . . . . . . . . . . . . 6
3.3.2 Input Assemblies . . . . . . . . . . . . . . . . . . . . . 6
3.4 Sensor Pressure Object
(Class Code 67
hex
) . . . . . . . . . . . . . . . . . . . . 7
3.5 Transform Pressure Object
(Class Code 68
hex
) . . . . . . . . . . . . . . . . . . . . 7
3.6 Analog Output Point Object
(Class Code 6A
hex
) . . . . . . . . . . . . . . . . . . . . 8
4 Supported Modes . . . . . . . . . . . . . . . . . . . . 8
4.1 Supplement to Bit Strobe . . . . . . . . . . . . . . . . 8
4.2 Supplement to Change of State . . . . . . . . . . . 8
5 Format of real values . . . . . . . . . . . . . . . . . 9
6 Service at INFICON . . . . . . . . . . . . . . . . . . .10
7 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EEC Declaration of Conformity . . . . . . . . . . . . . . 11
Declaration of Contamination . . . . . . . . . . . . . . . 12
2
tina12e1 (0106) PEG100-D.ga