INFICON MPG40x ATM to Ultra-High Vacuum Gauge - Manual (Page 4)

Maintenance, Troubleshooting
→ Operating Manual tina48e1
If operated at high pressures or under dirty con-
ditions, the gauge must be regularly cleaned.
Gauge failures due to contamination, as well as
expendable parts (filament), are not covered by the
warranty.
Returning the Product
WARNING
WARNING: forwarding contaminated products
Contaminated products (e.g. radioactive, toxic,
caustic or microbiological hazard) can be detri-
mental to health and environment.
Products returned to INFICON should preferably
be free of harmful substances. Adhere to the for-
warding regulations of all involved countries and
forwarding companies and enclose a duly com-
pleted declaration of contamination.
Products that are not clearly declared as "free of harmful
substances" are decontaminated at the expense of the
customer.
Products not accompanied by a duly completed declaration
of contamination are returned to the sender at his own ex-
pense.
Disposal
DANGER
DANGER: contaminated parts
Contaminated parts can be detrimental to health
and environment.
Before beginning to work, find out whether any
parts are contaminated. Adhere to the relevant
regulations and take the necessary precautions
when handling contaminated parts.
N
WARNING
WARNING: substances detrimental to the
environment
Products or parts thereof (mechanical and elec-
tric components, operating fluids etc.) can be
detrimental to the environment.
Dispose of such substances in accordance with
the relevant local regulations.
Separating the components
After disassembling the product, separate its components
according to the following criteria:
• Contaminated components
Contaminated components (radioactive, toxic, caustic, or
biological hazard etc.) must be decontaminated in accor-
dance with the relevant national regulations, separated
according to their materials, and disposed of.
• Other components
Such components must be separated according to their
materials and recycled.
Declaration of Contamination
Legally binding declaration:
We hereby declare that the information on this form is
complete and accurate and that we will assume any further
costs that may arise. The contaminated product will be dis-
patched in accordance with the applicable regulations.
Organization/company
Address
Post code, place
Phone Fax
Email
Name
Company stamp
Date and legally binding signature
Copies: Original for addressee
1 copy for accompanying documents
1 copy for file of sender
Operating fluid(s) used
(Must be drained before shipping.)
The service, repair, and/or disposal of vacuum equipment and com-
ponents will only be carried out if a correctly completed declaration
has been submitted. Non-completion will result in delay.
This declaration may only be completed (in block letters) and signed
by authorized and qualified staff.
Reason for return
Description of product
Type
Part
number
Serial number
no yes
Used in copper process
Seal product in plastic
bag and mark it with a
corresponding label.
This form can be downloaded from our website.
The product is free
of any substances
which are damaging
to health.
yes
Process related contamination of product:
toxic no 1) yes
corrosive no 1) yes
biological hazard no yes 2)
explosive no yes 2)
radioactive no yes 2)
other harmful substances no 1) yes
1) or not containing any
amount
of hazardous
residues that exceed the
permissible
exposure limits
2) Products thus
contaminated
will
not be
accepted with-
out written
evidence of
decontami -
nation.
Precautions associated with
substance Action if human
contact
Trade/product name
manufacturer Chemical name
(or symbol)
Harmful substances, gases and/or
by-products
Please list all substances, gases, and by-products
which the product may have come into contact with:
Declaration of Conformity
We, INFICON, hereby declare that the equip-
ment mentioned below complies with the pro-
visions of the Directive relating to electrical
equipment designed for use within certain vol-
tage limits 2006/95/EG and the Directive rela-
ting to electromagnetic compatibility
2004/10
8/EG.
Inverted Magnetron Pirani
Gauge
MPG400
MPG401
Part numbers
351-010
351-011
351-012
351-020
351-021
351-022
Standards
Harmonized and international/national standards and specifi-
cations:
• EN 61000-6-2
(EMC: generic immunity standard)
• EN 61000-6-3 (EMC: generic emission standard)
• EN 61010-1 (Safety requirements for electrical equip-
ment for measurement, control and labora-
tory use)
Signatures
INFICON AG, Balzers
6 October 2008 6 October 2008
Dr. Urs Wälchli
Managing Director Claudio Christoffel
Product Manager
LI–9496 Balzers
Liechtenstein
Tel +423 / 388 3111
Fax +423 / 388 3700
[email protected]
www.inficon.com