Intelix FLX-8X8A - Manual (Page 15)

FLX-8X8A Installation Guide
15
EDID Management
The stock EDID for the inputs of the FLX-8X8A is 1280x1024 (computer video input) and 1080p with
stereo audio (consumer video input). In order to change the EDID information for an input, the EDID
copy command will need to be sent to the matrix via RS232 or TCP/IP.
EDIDM[Y]B[X].
Copy EDID of output [Y] to input [X]
EDIDMInit. Restore factory EDID information
The FLX-RI4 input card ignores the EDID settings since there is a scaler engine on each input to output a
pre-defined video resolution.
Copy EDID
To copy the EDID information from output 3 to input 1, transmit the following command:
EDIDM3B1.