Intelix DIGI-44B - Manual (Page 22)

DIGI-44B Installation Guide
Output 3 Commands
Function Command Response
Select Input 1 cir 5E<CR><LF> s30<CR><LF> The updated status for output 3. Represented as an ASCII
string in the format of “sXY” where:
• X is the output channel
• The value of Y maps as follows:
0 = input 1
1 = input 2
2 = input 3
3 = input 4
Select Input 2 cir 06<CR><LF> s31<CR><LF>
Select Input 3 cir 05<CR><LF> s32<CR><LF>
Select Input 4 cir 03<CR><LF> s33<CR><LF>
Select Input Up cir 48<CR><LF> new route
Select Input Down cir 55<CR><LF> new route
Output 4 Commands
Function Command Response
Select Input 1 cir 18<CR><LF> s40<CR><LF> The updated status for output 4. Represented as an ASCII
string in the format of “sXY” where:
• X is the output channel
• The value of Y maps as follows:
0 = input 1
1 = input 2
2 = input 3
3 = input 4
Select Input 2 cir 44<CR><LF> s41<CR><LF>
Select Input 3 cir 0F<CR><LF> s42<CR><LF>
Select Input 4 cir 51<CR><LF> s43<CR><LF>
Select Input Up cir 40<CR><LF> new route
Select Input Down cir 07<CR><LF> new route
RS232 & TCP/IP System Commands
Misc. Commands
Function Command Response
Get Device Type br <space> aDIGI-44B ASCII string containing the letter
“a” followed by the name of the
device
Get Device Status bc <space> Ex:
s10<CR><LF>
s21<CR><LF>
s32<CR><LF>
s43<CR><LF>
ASCII string in the format of:
“s1Ys2Ys3Ys4Y” where Y is the
input source being routed to each
output. Each segment is
separated by a <CR><LF>.
The value of Y maps as follows:
0 = input 1
1 = input 2
2 = input 3
3 = input 4
The output channels map as
follows:
s1 = output 1
s2 = output 2
s3 = output 3
s4 = output 4
Get IP Mode and
Address
gipm<CR><LF> Static IP Ex:
ipm sip 192 168 001 114 <CR><LF>
ASCII string containing
“ipm<space>” followed by IP
mode, the IP address,
<space><CR><LF>
The value of the IP mode map as
follows:
sip = Static IP Mode
dhc = Dynamic IP Mode
DHCP IP Ex:
ipm dhc 192 168 001 101 <CR><LF>
22