Intelix DIGI-44B - Manual (Page 23)

DIGI-44B Installation Guide
Misc. Commands
Function Command Response
Set IP Mode - DHCP dhc <CR><LF> “DHCP<CR><LF>”
Set IP Mode - Static sip www xxx yyy zzz<CR><LF>
Where:
www = 1 st octet
xxx = 2 nd octet
yyy = 3 rd octet
zzz = 4th octet
Each octet is separated by a
<space>.
Ex: Set IP to 192.168.1.114:
sip 192 168 001 114<CR><LF>
Ex:
IP 192 168 001 114<CR><LF>
ASCII string that includes the IP
address set by the command.
“IP www xxx yyy zzz<CR><LF>”
***When using this command via
a TCP/IP connection, the response
may be truncated due to the loss
of communications caused by
changing the IP address.
23