IPitomy IP1100+ Upgrade Guide - Manual (Page 4)

Page 4 of 5
Copyright 2009 © IPitomy Communications, LLC
3. Click Browse and find the current firmware file ipitomy_pbx_<build#>-uf.tgz
4. Click Load File to begin the upgrade process
5. Depending on your starting firmware version, one of two things will occur:
1. A dialog box will pop up announcing that the PBX will reboot, click OK and wait 5
minutes. After the 5 minutes has passed, log out of the PBX, then log back into
the PBX (you should see a message when logging in that the Database does not
match and will be converted)
2. A progress bar will appear while the PBX upgrades and reboots, after which you
will be returned to the login screen.
6. Log into the PBX and a message will display stating the Database version does not
match. Click OK and the DB will update.
7. Click Apply Changes
Restoring Backups (Does not need to be done if you want to use the same DB as was
previously running on the system)
1. Navigate to PBX Setup=>Database
2. Find the backup you wish to load and click the curved arrow to restore it as the active
database.
3. Once the Database loads, Click Apply Changes.
3. Navigate to PBXSetup->Services and Click "Restart All Services"
For systems with Analog Cards, T1/PRI Cards or Xorcom USB Devices
1. If your system has any of these products installed, navigate to Providers=>Hardware
Providers
2. Scroll down to the Hardware Functions panel