Jabra WAVE - Manual (Page 13)

11
en
g
li
sh
Jabra WaVE
TAKING CARE OF YOUR HEADSET
- always store the Jabra WaVE with the power off and safely
protected
- avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F) . this can shorten
battery life and may affect operation . High temperatures may
also degrade performance .
- Do not expose the Jabra WaVE to rain or other liquids .
GLOSSARY
1. Bluetooth® is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx . 10 meters/33 feet) . Bluetooth® is safe
to use . It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
Bluetooth® devices either . Get more information at
www .bluetooth .com .
2. Bluetooth® profiles are the different ways that Bluetooth®
devices communicate with other devices . Bluetooth® phones
support the headset profile, the hands-free profile or both . In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software .
3. Pairing creates a unique and encrypted link between two
Bluetooth® devices and lets them communicate with each
other . Bluetooth® devices will not work if the devices have not
been paired .
4. Passkey or PIN is a code that you enter on your Bluetooth®
enabled device (e .g . a mobile phone) to pair it with your
Jabra WaVE . this makes your device and the Jabra WaVE
recognize each other and automatically work together .
5. Standby mode is when the Jabra WaVE is passively waiting for
a call . When you ‘end’ a call on your mobile phone, the headset
goes into standby mode .
Dispose of the product according
to local standards and regulations .
www .jabra .com/weee