Jabra WAVE - Manual (Page 6)

4
en
g
li
sh
Jabra WaVE
GETTING STARTED
You should follow three steps before using your headset:
1. Charge your headset
2. Activate Bluetooth® on your mobile phone (refer to the manual for
your Mobile phone)
3. Pair your headset to your mobile phone
the Jabra WaVE is easy to operate . the answer/end button on the
headset performs different functions depending on how long you
press it .
Instruction Duration of press
tap Press briefly
Double tap 2 quickly repeated taps
Press approx: 1 second
Press and hold approx: 5 seconds
CHARGE YOUR HEADSET
Make sure that your headset is fully charged for two hours before
you start using it . Use the aC power supply to charge from a power
socket . When the battery indicator has a solid red light, your headset is
charging . When the headset is fully charged the battery indicator
turns solid green for five minutes and then turns off .
Use only the charger provided in the box - do not use chargers from
any other devices as this may damage your headset .
Please note: the lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .