B&B Electronics Zlinx 485 - Manual (Page 33)

Modbus Basics
Manual Documentation Number: Zlinx485m-1808
www.bb-elec.com
www.bb-europe.com
An input tree appears listing all base and expansion modules in the system and the
inputs available on them.
Figure 34. Digital Input Configuration
2. Select the Digital Input to be configured.
3. Select Discrete or Frequency Counter (for the first two inputs only). Do NOT exceed
5 kHz for frequency input.
Setting the Digital Mode of either of the first two DI’s to Frequency Mode sets both DI’s on that
module to the same mode. Do NOT exceed 5 kHz for frequency input.
4. Select the Analog Input to be configured.
5. Select the required Analog Mode (0 to 10 VDC or 0 to 20 mA).
Setting the Analog Mode of one AI or AO sets all AI’s and AO’s on that module to the same mode.