JUMO 705010 mTRON T - Multichannel Controller Module Data Sheet - Manual

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Page 1/15
JUMO mTRON T
Measuring, Control, and Automation System
Multichannel controller module
Brief description
The multichannel controller module supports up to four PID controller channels (cascadable). In
the standard version, two high-quality universal analog inputs for thermocouples, RTD tempera-
ture probes, resistance transmitters, resistance/potentiometers, and standard signals are avail-
able. Two digital inputs (DC 0/24 V) and two digital outputs as a relay with N/O contact
(AC 230 V / 3 A) or as a logic output (DC 0/15 V) are also available as part of the standard ver-
sion. Due to the three option slots (option 1, 2, and 3), the module can be extended up to four
universal analog inputs, eight digital inputs, three analog outputs, or eight digital outputs.
The digitized input values/states are available in the system for further processing. The digital
and the analog outputs can be actuated by the system (via the connection list or directly by the
PLC) or directly by the module.
The module operates independently, even if the central processing unit fails or the higher-ranking
system malfunctions. This behavior can be configured.
LEDs are used to indicate applied voltage supply, the module operating status, as well as the
status of the digital inputs/outputs.
For expansion of the inputs/outputs or for service work, the module insert can be easily pulled
out of the case at the front. The case including the bus PCB remains mounted on the DIN rail.
A setup program allows the user to comfortably configure and parameterize the multichannel
controller module.
Type 705010/...
Block diagram
2 universal analog inputs
Option 1
2 digital inputs
(DC 0/24 V)
2 digital outputs:
Relay
Logic
(N/O)
or
(DC 0/15 V,
to control an external
solid-state relay)
705010
Option 2
Option 3
Voltage supply System bus
Features
• Up to four PID controller channels each with
two parameter sets and four setpoint values
• Self-optimization using the oscillation or
step response method
• Independent operation
• Two universal analog inputs
• Customer-specific linearization (polynomial
up to the 4th order)
• Two digital inputs DC 0/24 V
• Two digital outputs as a relay with N/O con-
tact or a logic output
• The inputs and outputs can be extended
(option)
• All analog inputs are electrically isolated
from each other
• Limit value monitoring
• One counting input up to 10 kHz
• Automatic configuration after the module in-
sert has been exchanged
• Connection of the inputs and outputs at the
front
• Removable terminal strips with Push-In
technology
• Quick wiring of operating voltage and sys-
tem bus due to easy module connection
Approval/approval marks (see “Technical data”)
Data Sheet 705010
2013-05-07/00529107