JUMO 706581 LOGOSCREEN nt Operating Manual User Manual
Jumo logoscreen nt
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Instrument Description
- 2.1 Displays and Controls
- 2.2 Analog Inputs
- 2.3 Binary Inputs/Outputs
- 2.4 Relay Outputs
- 2.5 Counter/Integrators
- 2.5.1 Counter
- 2.5.2 Integrators
- 2.5.3 Operating time counter
- 2.5.4 High-speed counters
- 2.5.5 Flow rate quantity
- 2.5.6 Recording period of the counts
- 2.5.7 Reset counters
- 2.5.8 Response to setting the time
- 2.5.9 Response to instrument reconfiguration
- 2.5.10 Response to reconfiguration of the counters on the instrument
- 2.5.11 Response to reconfiguration of counters with setup program
- 2.6 Math/Logic Module
- 2.7 Binary Signals
- 2.8 Operating Modes
- 2.9 Data Storage
- 2.10 Reading out Data
- 2.11 Archiving and Evaluating Data
- 3 Operating Principle
- 4 Visualization
- 5 Memory Presentation (History)
- 6 Alarm and Event Lists
- 7 Memory Manager
- 8 Device Manager
- 9 Parameterization
- 10 Configuration - General
- 11 Configuration - Device Data
- 12 Configuration - Screen
- 13 Configuration - Analog Inputs
- 14 Configuration - Binary Inputs/Outputs
- 15 Configuration - Relay
- 16 Configuration - External Analog Inputs
- 17 Configuration - External Binary Inputs
- 18 Configuration - Groups
- 19 Configuration Report
- 20 Configuration - Limit Monitoring
- 21 Configuration - Counters/Integrators
- 22 Configuration - Interface
- 23 Configuration – Batches/Plants
- 24 Configuration - Date and Time
- 25 Configuration - Time server (SNTP)
- 26 Configuration - Undocumented Parameters
- 27 Entering text and values
- 28 Web server
- 28.1 General
- 28.2 Online Visualization (All Visualizations Except Batches)
- 28.3 Three freely programmable HTML pages
- 28.4 Online Visualization of Current Batch Reports
- 28.5 QuadView
- 28.6 General information
- 28.7 Online visualization (all visualizations other than batches)
- 28.8 Online visualization of the current batch reports
- 28.9 QuadView
- 29 Appendix
- 30 Index