Kifco T45x1320 400,000 - Present Operator Manual - Manual (Page 10)

- Wheels chain
clutchs
Engaged Engaged Disengaged Disengaged
a)
b)
c)
d)
2 - Verify that the 2 clutchs
is disengaged
OPERATION
User instruction book St8
Adjusting of the trolley
2)
1 - go up and adjust the gun as indicated on the note of this one. - Gun
IMPORTANT: IMPORTANT:
It’s imperative then the clutch are engage or disengage on 2 side
in even time to maintain the synchronization of mechanism
- anti-return
pawl
If the pawl
is blocked
3 - Raise the
anti-return pawl
Anti-return pawl upper Anti-return pawl upper Anti-return pawl lower Anti-return pawl lower
- If the anti-return pawl is hard to raise, engage the clutch on gearbox,
pass a gear. Thread the crank on power take off
turn the until the pawl is cleared. Turn the crank then in the
inverse sense until has what one doesn't feel an effort anymore.
- Freeing
the pawl
- Do not release a stroke the crank, but accompanied the effort.
The polyethylene acting like a spring the crank would be able to
to retort brutally in the contrary sense with risk of injury.
- raccording the
hose
to the trolley
4 - Pull on the hose with the help of a rope
to bring the flange closer to the trolley
5 - Assemble the 2 flange (do not forget the gasket)
and install the end switch bar
Gasket
End swith bar
Page 06