Kinetik Blood Pressure BPM3C - Manual (Page 4)

3
Parts
Systolic
low battery
pulse detected (appears during testing)
deflate to measure (deflate air in cuff)
Diastolic
LCD Screen
BLOOD PRESSURE
LEVEL CLASSIFICATION
INDICATOR
Memory
Start
Pulse
Loading Batteries
a. Open battery cover at the back of the device (cover slides off).
b. Insert two "AAA" batteries, observing correct polarity.
c. Close the battery door.
4
Non-rechargeable batteries are not to be recharged.
Always remove exhausted batteries from the monitor.
The supply terminals are not to be short circuited.
Do not mix old and new batteries or different types of batteries. Do not use
rechargeable batteries. Only batteries of the same or equivalent type as
recommended are to be used. Batteries must be handled with care under adult
supervision. If batteries leak and come into contact with skin or eyes, wash
immediately with copious amounts of water.
Setting up your Blood Pressure Monitor
Replacing Batteries
When the LCD screen displays 'low battery'
, new batteries must be
inserted immediately to ensure accurate results.
Rechargeable batteries with a voltage of 1.2V are not suitable for this product.
Please dispose of batteries according to battery manufacturer's instructions.
Battery