Kinetik Blood Pressure BPM3C - Manual (Page 9)

Measuring Process
a. Once the cuff has automatically inflated, the LCD screen will display “ ” whilst the pressure is
gradually reduced and the monitor takes an automatic measurement.
b. The monitor will beep when the automatic measurement has finished.
8
Using your Blood Pressure Monitor
If there is an error or abnormal reading, please refer to the “ Troubleshooting ” section.
When automatic inflation begins, the unit will inflate to 187mmHg. If a pulse is not detected, the unit
will continue to inflate automatically to the next pressurisation level. This will continue to a maximum
level of 300mmHg.
If you feel any discomfort or pain during this time, turn the unit off and remove the cuff
immediately. Consult your local pharmacist or healthcare professional for advice.
Once automatic inflation begins, you can choose to inflate the cuff to the next pressurisation level by
pressing the “Memory” button just before the cuff reaches the pre-set pressurisation level.