Kisan Electronics 30W-D - Manual (Page 28)

Page - 27
MW: K1100LT, RT series & Older models
B
20W-S or 20W-D
most 1100 models, the
has (2) single
ntact bulbs. Replace the
p mounted brake bulb with
W-S tailBlazer.
ote! On models with the
On
taillight assembly
co
to
20
N
“Lamp Check” circuit,
use ‘Z” version.
POLARITY CHECK:
If the tailBlazer fails to execute the 4-sec flash pattern upon applying
brakes, chec
Access for (2)
wing-nuts here
k for correct polarity of the socket.
Brown wire is for
ground (body of the
socket) and Grey
wire supplies the
power to the
contact.