Klein Tools Chicago Grips - Manual (Page 4)

1. Set up ratchet hoist and Chicago grips as shown in the image below.
Splicing Conductor Cables
Klein Chicago Grip
Klein Chicago Grip
Klein KN1500PEX
Hoist
Klein Chicago Grip
Klein KN1500PEX
Hoist
Klein Chicago Grip
2. Connect the KN1500PEX Web Strap Ratchet Hoist to each grip, and ratchet to the desired tension to
make the splice.
The cable can now be spliced according to standard work procedures and material guidelines.
3. When finished with the splice, break the tension using the hoist handle, then use either the handle or drum knob to
continue releasing the tension.
4