KV2 Audio VHD3200 - Manual (Page 4)

INTRODUCTION, WARRANTY
Thank you for purchasing this KV2 Audio VHD3200 subwoofer amplifier. This manual contains
important information on operating this unit correctly and safely. Please take some time and read
this manual to familiarise yourself with the advanced features of this unit.
The VHD3200 is a rack mounted subwoofer amplifier. The unit contains two separate 1600 watt
amplifiers with individual power supplies, signal paths and inputs and outputs within a single four
rack space chassis. The unit can be used in bridged mode to provide full power for one channel
mode. The unit acts as a slave for the VHD2000, which provides audio and control signal. It can
also be used with the EPAK2500/R when used in combination with KV2 Audio ES systems and
power the associated ES subwoofer systems.
Although this unit is simple to operate improper use can be dangerous. This is a very high-
powered device that can put out high voltages and sizable currents. Always use safe operating
techniques with the VHD3200.
FOR YOUR SAFETY , READ THE IMPORTANT PRECAUTIONS SECTION AS WELL AS THE INPUT,
OUTPUT AND POWER CONNECTION SECTIONS OF THIS MANUAL.
WARRANTY
Your VHD3200 is covered against defects in material and workmanship. Refer to your supplier for
more details.
SERVICE
In the unlikely event that your VHD3200 develops a problem, it must be returned to an authorized
distributor , service centre or shipped directly to our factory. Because of the complexity of the
design and the risk of electrical shock, all repairs must be attempted only by qualified technical
personnel.
If the unit needs to be shipped back to the factory, it must be sent in its original carton. If improp-
erly packed, the unit may be damaged. To obtain service, contact your nearest KV2 Audio Service
Centre, Distributor or Dealer .
1