KV2 Audio VHD3200 - Manual (Page 9)

OPERATION
Amplifier / Controller Setting
VHD2000 Setting 1B
VHD2000 Setting 2
VHD2000 Setting 3
VHD2000 Setting 4
VHD2000 Setting 5
VHD2000 Setting 6
Sub-A Out
2 x VHD2.16 (1x2.15)
2 x VHD4.18
2 x VHD2.16 (1x2.15)
2 x VHD2.16 (1x2.15)
4 x VHD2.16 (2x2.15)
4 x VHD2.16 (2x2.15)
Sub-B Out
1 x VHD2.21
2 x VHD4.18
2 x VHD1.21
2 x VHD4.18
4 x VHD4.18
4 x VHD1.21
NOTE: Settings 1B, 5 and 6 require 2 x VHD3200 amps
The VHD3200 is designed to be used either with the VHD2000 or the EPAK2500/R controller
amplifiers and to power only certain combinations of KV2 Audio Subwoofers. Because of its
unique design it cannot be used as a standard power amplifier to power any other loudspeakers
without the possibility of damage occurring. The various VHD2000 combinations are shown in the
following table:
Please refer to the VHD2000 or the EPAK2500/R manuals for further information on setting up
these systems.
4
VHD2000 Setting 1 2 x VHD2.16 (1x2.15) 2 x VHD2.16 (1x2.15)