KV2 Audio VHD3200 - Manual (Page 5)

GETTING STARTED
2.1 UNPACKING
Unpack the VHD3200 and check to see if there is any damage to it. If you find any damage notify
your supplier immediately. Only the consignee may institute a claim with the carrier for damage
incurred during shipping. Be sure to save the carton and all packing materials for the carrier's
inspection.
Should you ever need to ship the unit, only use the original factory packaging. If the shipping
carton is unavailable, contact your supplier to obtain a replacement.
The VHD3200 carton should contain:
t
7)%
BNQMJöFS
DPOUSPM
VOJU
t
6TFS
HVJEF
t
1PXFS$PO
EFUBDIBCMF
QPXFS
DBCMF
2.2 RACK MOUNTING
VHD3200’s will mount in standard 19" rack systems. Integral rear mounting rack ears are also
provided for additional support, do not rely on fixing and mounting the VHD3200 using just the
front panel as support. Use eight screws and washers to mount the amplifier to the equipment
rack rails (four for the front and four for the rear). We recommend using a shock mounted rack for
touring use to prolong the life of your VHD3200.
2
AC IN A AC IN B
SERIAL NUMBER WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT A 1600W / 4
BRIDGE
OUTPUT A
INPUT B
OFF ON 3200W / 8
1600W / 4 OUTPUT B
POWER ON / THERMAL (AUTO RESET)
SIGNAL PRESENT
LIMITER