Landoll 3K914 REAR HITCH KIT User Manual
Landoll Special machinery
Advertising
3K914 REAR HITCH KIT
INSTALLATION INSTRUCTIONS
Place L.H. Hitch Bracket on top of the Landcommander frame and position as shown in
drawing below. Place a 3K935 strap on underside of frame and assemble loosely with
5/8 X 12” machine bolts, lockwashers, and nuts. Attach the R.H. hitch bracket in
Next, attach the 1” thick hitch plate to the angles at the rear of the hitch brackets.
Square up the entire assembly and tighten all fasteners.
similar fashion.
Use 5/8 X 2 1/2” capscrews, lockwashers, flat washers, and nuts.
LANDCOMMANDER FRAME
REAR
5/8 X 12” MACHINE BOLTS
5/8 LOCK WASHERS
5/8 HEX NUTS
3K935 STRAPS (UNDER FRAME)
5/8 X 2 1/2” CAPSCREWS
5/8 LOCK WASHERS
5/8 FLAT WASHERS (ON BOTTOM SIDE, AGAINST SLOTS)
5/8 HEX NUTS
0613
3K937
Advertising
Table of contents