Landoll 173531 FRAME STABILIZER KIT - Manual

F-694 Edition Brillion Farm Equipment 1-1
rev10-09-2012 Brillion, Wisconsin 54110
INSTALLATION INSTRUCTIONS FOR
FRAME STABILIZER KIT (P/N 173531) ON
WING FLOAT PULVERIZER FRAME (P/N 2P416)
1. Identify the six (6) weldments required (See
Figure 1-1): 2. Identify the piece parts (4) required (shipped with the
hardware) (See Figure 1-2):
Figure 1-1: Required Weldments
Figure 1-2: Required Piece Parts
3. Place the Wing Float Pulverizer in a suitable area to
work with the frame while the wings are unfolded.
a. Pneumatic tools will be of benefit during the
installation process.
b. One hydraulic line will need to be opened and
reassembled.
P/N 173167
BRACE-FRAME, LH
P/N 173168
BRACE-FRAME, RH
P/N 173539
TRUSS-FRAME, LH
P/N 173540
TRUSS-FRAME, RH
P/N 173175
BRACE-SIDE, LH
P/N 173174
BRACE-SIDE, RH
required weldments
P/N 171642
PLATE-TRUSS
P/N 173532
PLATE-REAR MOUNT
P/N 173534
PLATE-FOUR BOLT
P/N 173533
PLATE-OFFSET
REAR MOUNT
required piece parts