Setting up the power supply – Leica Biosystems HI1220 User Manual
Page 11
Advertising
11
Leica HI1220 Flattening Table
4. Instrument Setup
4.2 Unpacking and setting up the HI1220 (continued)
Fig. 4
Fig. 5
Remove the accessories and carefully lift the
instrument out of the carton (
Fig. 4
).
Hold the instrument firmly with one hand, pull off
both foam sections (
Fig. 5
) and remove the dust
cover.
4.3 Setting up the power supply
• Before connecting the power cable, make
sure that the power switch (3) on the rear of
the instrument (
Fig. 6
) is switched to "0" = OFF.
• Use the instrument with the provided power
cable only.
• Insert the connector of the power cable
(
Fig. 5
, 2) into the connection socket (4) and
plug the power plug into the power socket
1
2
Fig. 6
3
4
х
х
Advertising