Leica Biosystems HI1210 - Manual (Page 12)

12 Instructions for Use V 3.2 RevE – 02/2013
5. Operation
5.1 Control panel fields on the instrument
Fig. 7
6 5 8 7 9
10
5 = POWER LED
Is illuminated when the instrument
is switched on with the main power
switch.
6 = SET
Indicates the selected target tempera-
ture.
7 = Set key: lower temperature.
8 = Set key: increase temperature.
9 = RUN/STOP
Switch instrument on or off.
10 = Display
5.2 Switching the instrument on
• Before switching the instrument on, fill the water bath with a sufficient quantity of distilled
water.
• Switch on the instrument with the power switch on the left rear panel of the instrument
( Fig. 6 , 3).
• The green LED display POWER on the front panel is then illuminated.