Leica Biosystems EG F - Manual (Page 10)

10 Instructions for Use V1.3 RevC – 11/2012
Necessary assembly work
Proceed as follows to make the instrument ready
for use:
• Forceps holder (1) with paraffin collecting tray
(2) is factory-installed on the right side.
If it needs to be installed on the left hand side,
follow these steps:
- Loosen the four Phillips screws (3) on the
bottom of the instrument.
- Remove forceps holder / collecting tray, re-
verse it and fasten it to the opposite side (insert
screws in corresponding holes on opposite
side).
Fig. 5
1
2
3
3. Installation