4 electrical connection, Electrical connection, Installation – Leica Biosystems EG F User Manual
Page 12
Advertising
12
Instructions for Use V1.3 RevC – 11/2012
3. Installation
Fig. 6
3
The instrument MUST be connected to a grounded mains socket.
Only the power cord intended for the local power supply (socket) may be used.
Do not use an extension cord!
The Leica EG F can be connected to different electrical power systems (voltage and frequency-
dependent,
refer to Chapter 4.3 "Technical data"
).
Please observe the following notes to prevent damage to the instrument:
3.4 Electrical connection
The instrument can be connected to the following voltages:
100 to 120 V and 220 to 240 V
~
,
50/60 Hz.
The instrument is factory-set to 220 to 240 V
~
(Fig. 6). If the voltage needs to be changed, insert
a screwdriver in the slot (3) and move the setting to the desired value.
Advertising