Leica Biosystems RM CoolClamp - Manual (Page 11)

Instrument Setup
INHECO GmbH 11
General operating instructions
To prevent injury and damage, provision must be made for an
unobstructed air supply; refer also to the cleaning instructions on
page 17. The fan must not be blocked and the air outlet must not be
obstructed. Please check before each use that the fan rotates freely. To
prevent damage to the RM CoolClamp, the maximum permissible ambient
temperature must not be exceeded; for additional information, refer to the
specifications on page 18.
Figure 2: Ventilation openings
When operating the RM CoolClamp , condensation on the clamp occurs. This is
a natural physical process.
Ventilation
openings, outlet
Ventilation
openings, inlet

I
n
f
o
r
m
a
t
i
o
n