Leica Biosystems CW4000 Quick Start Guide - Manual (Page 22)

Page 18 Leica CW4000 Quick Start Guide
Configuring Your System
Again, if you have just received a new system the appropriate
software will have been installed and configured. Please do not
change this configuration.
If you have installed this software yourself, you may need to tell the
software what hardware items you are using. To do this, you should
run the ‘Cyto Administrator’, by clicking on the icon in the ‘Leica
Cytogenetics’ window, or the item in ‘Leica Cytogenetics’ in the
Windows Start Menu.
Language and Database Settings
The installation procedure should have ensured that the language
and database settings are correct. You can use the ‘Cyto
Administrator’ to create and/or select another database and to
change the user interface language.
Image Acquisition Settings
If you have an Image Acquisition device (e.g. an Image capture
board), you should click on the ‘Image Acquisition Settings…’ button
and ensure that the device and camera selected correspond to those
installed on your system.
If you have a Photometrics PVCAM/SenSys camera, we recommend
that you first select the ‘Settings…’ button and then ‘PCISetup…’
button. This should run the Photometrics Setup program. You should
ensure that this shows the correct camera name (e.g. ‘SenSys’) with
the status ‘OK’. You can then use the ‘Preview’ button to see the
image from the camera.