Leica Biosystems MC120 HD - Manual (Page 30)

Leica MC120 HD / MC170 HD User Manual Application 30
General Notes
Before capturing the image, ensure
that enough memory is available on
the SD card and that write protection has
not been activated. If the SD memory card
is full or protected, the Leica MC120 HD /
MC170 HD's status light stays red, and you
cannot acquire any more images.
In order to avoid instrument malfunc-
tions, do not connect the Leica MC120 HD /
MC170 HD to a computer while in HD mode
(standalone).
In the highest resolution, a single image
takes up approx. 1.3 megabytes of stor-
age space on the SD card. This means that
per gigabyte of capacity, you can save over
700 images.
Recording
1. Focus on the specimen.
2. Push the SD memory card into the slot on
top of the Leica MC120 HD / MC170 HD
until it clicks into place.
The Leica MC120 HD / MC170 HD's status light
is illuminated in green. The camera is now ready
to save images to the SD memory card.
3. Press the record button on the remote
control or press the (optional) handswitch/
footswitch to capture an image.
You hear a signal tone as confirmation. While
the image is being acquired, the status light
flashes green and the word "Capture..." appears
briefly on the HD monitor.
4. In order to remove the SD card from the
camera, press on the SD memory card in
the memory slot so that it pops out.
You can now transfer the images to your
computer directly using an SD card slot or by
using an SD memory card reader.
Capturing Images without a Computer
PC-HD
HDMI
ON-OFF 2