Configuring predefined illumination scenarios – Leica Biosystems MC120 HD User Manual
Page 48
Leica MC120 HD / MC170 HD User Manual
User Menu 48
Sequence
Changing the illumination mode
The Leica MC120 HD / MC170 HD is
supplied with various illumination
modes that cover a wide spectrum of possible
situations.
1. Press
on the remote control to
display the current illumination mode on
the HD monitor.
2. Press
again to switch to the next
illumination mode. The microscope imme-
diately switches the illumination mode and
sets the stored parameters.
3. Wait until the displayed illumination mode
disappears from the monitor. This means
that illumination mode is now active.
To return to the last selected mode, press
until the "LAST USED" setting
appears.
If you do not press
for 5 seconds,
the selected illumination mode is
applied.
Configuring Predefined Illumination Scenarios
LAST USED
AUTO
BRIGHT FIELD
DARK FIELD
ILLUM MODE 1
ILLUM MODE 2
ILLUM MODE 3