Lenze Controller 3200 C Operating Instructions - Manual (Page 27)

Mechanical installation
Mounting
5
27 Lenze ¯ BA_3231C ¯ 5.0
5.3 Mounting
(
Stop!
Short circuit on the backplane bus contact
The backplane bus signals are forwarded to the adjacent module of the
I/O system 1000 via a contact strip. If electrically conductive material
contacts this contact strip, a short circuit can be caused. Moreover,
touching the contact strip can cause a static discharge.
Possible consequences:
¯ Destruction of the device and/or the modules.
Protective measures:
Plug on the contact cover provided in the scope of supply, ...
¯ on to the side contacts of the last I/O module or
¯ if no module of the I/O system 1000 is added.
1
2
1
0
32xxC_004
Fig. 5−2 Mounting
Pos. Description
A Contact cover
How to mount the Controller:
1. Loosen the locking lever for the DIN rail.
2. Put the Controller on the DIN rail.
3. Shut the locking lever.