Lenze Controller 3200 C Operating Instructions - Manual (Page 34)

Electrical installation
Interfaces for peripheral devices
EtherCAT interface
6
34 Lenze ¯ BA_3231C ¯ 5.0
6.4.4 EtherCAT interface
Figure Connection Connection type Cable type
X2:
EtherCAT
RJ45 socket
Network cable
CAT5e S/FTP
(recommended)
Max. cable length 100 m IPC001
)
Note!
If the RJ45 plug connection is exposed to oscillating or vibrating stress:
¯ Use a strain relief in the immediate vicinity of the RJ45 socket.
¯ Select the contact surface on which the device is mounted as fixing
point of the strain relief.
¯ Comply with the related minimum bending radius of the cable used.
Fig. 6−3 Controller am EtherCAT−Netzwerk