Lenze 3200 C - Manual (Page 32)

Electrical installation
Interfaces for peripheral devices
Ethernet interface
6
32 Lenze ¯ BA_3241C ¯ 4.0
6.4.3 Ethernet interface
Figure Connection Connection type Cable type
X2 / X3 / X4:
Ethernet
X2 LAN2
X3 LAN1b (internal switch)
X4 LAN1a (internal switch)
RJ45 socket
Network cable
CAT5e S/FTP
(recommended)
Max. cable length 100 m IPC001
)
Note!
If the RJ45 plug connection is exposed to oscillating or vibrating stress:
¯ Use a strain relief in the immediate vicinity of the RJ45 socket.
¯ Select the contact surface on which the device is mounted as fixing
point of the strain relief.
¯ Comply with the related minimum bending radius of the cable used.
The IPC can be connected to the higher−level network via X3 (LAN1b) or X4 (LAN1a). If the
application comprises several IPCs, these can be networked in a line network via the
second LAN interface.
¯ Baud rates: 10 or 100 Mbps
X2 (LAN2) can be used for service purposes.
¯ Baud rates: 10, 100 or 1000 Mbps
Fig. 6−2 Beispiel: 3241 C am Ethernet−Netzwerk