Lenze Controller-based Automation - Manual (Page 35)

Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17
35
4 System components
4.4 Runtime software of the Lenze Controllers
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.4.3.1 Sample topology 1: External monitor panel/display for cabinet controllers
[4-1] Sample topology: Controller 3231 C with an external monitor panel (connected to the DVI interface)
This topology with regard to its performance corresponds to the implemented solution (control/
visualisation on the same controller). The external monitor panel/display shows the visualisation.
Advantages
• Small amount of cabling
• Protected operating conditions
• Extensible topology
• No impact on the real-time capability of the fieldbus by the visualisation