Lenze EMF2180IB EthernetCAN - Manual (Page 44)

6 Electrical installation
EDKMF2180 DE/EN/FR/ES/IT 3.0
44

H1_E_INST-SteckerFederkraftAnschluss FKCT
6 Electrical installation
2180FEW008
Installation steps
Step Activity Terminal
(see graphic)
Additional
information
1. Establish a connection to the CAN bus:
Plug the Sub-D plug (”EWZ0046”, see
accessories) into the communication
module.   47
2. Connect the following components via
Ethernet with each other:  50
Communication module 
PC 
Servo Drives 9400 
Other Ethernet nodes
3. Connect voltage supply to the plug
connector   52