Lenze E94AYCEC - Manual (Page 18)

2 Electrical installation
EDK94AYCEC DE/EN/FR/ES/IT 1.0
18
l
H1_E_INST−−−−(DUMMYSEITEVOR)−−−
2 Electrical installation
External voltage supply
Supply the communication module via the connection X210 by means of a separate supply
voltage.
Designation Explanation
+ External voltage supply
U = 24 V DC (20.4 V − 0 % ... 28.8 V + 0 %)
I = 140 mA
− Reference potential for external voltage supply
For greater distances between the control cabinets, use a power supply unit in each control
cabinet.
Screw terminal data
Plug connector with screw connection
Possible connections rigid: 1.5 mm 2 (AWG 16)
flexible:
without wire end ferrule
1.5 mm
2 (AWG 16)
with wire end ferrule, without plastic sleeve
1.5 mm
2 (AWG 16)
with wire end ferrule, with plastic sleeve
1.5 mm
2 (AWG 16)
Tightening torque 0.5 ... 0.6 Nm (4.4 ... 5.3 lb−in)
Bare end 6 mm