Lenze EDKRBM220W - Manual (Page 5)

Module resistors
8200 motec
EDKRBM220W
2.0
l
Lenze Drive Systems GmbH, Postfach 10 13 52, D-31763 Hameln
( +49 (0) 5154 82-0, Fax Service: +49 (0) 5154 82-1112
These Instructions
Ÿ contain the important Technical Data and describe the installation of the module resistors.
Ÿ are only valid
- for ERBM470R110W and ERBM240R220W
- together with the Operating Instructions of the basic device.
Please read the documentation accompanying the basic device and
observe the safety notes listed before beginning your work.
Range of application
Module resistors with powers of 110 W and 220 W are used as load resistors on a 8200 motec frequency
inverter.
With rated load the surface temperature may reach approx. 150 °C!
EDKRBM220W
00468360
10/03
Show/Hide Bookmarks