Inserting the memory card – Lenze EPZ-H214 User Manual
Page 6
Advertising
SD card
EDKEPZ−H214 DE/EN 1.0
6
l
SD−−−−(DUMMYSEITEVOR)−−−
Inserting the memory card
How to insert the memory card into the card module:
8
Card Module
l
2221_012
I
Tip!
To simplify handling, we recommend inserting the memory card before the
card module is attached to the AIF interface of the corresponding target
system.
)
Note!
In the following cases the
E2
error code is shown on the 7−segment display of
the card module:
ƒ
The memory card is missing.
ƒ
The memory card is not supported by the card module.
ƒ
The memory card is write−protected (slide switch in "LOCK" position) and
an upload has been started via the T2 key.
Advertising