Lenze E82ZJ00x - Manual (Page 7)

Preface and general information
EDK82ZJ003 DE/EN/FR 1.0 7
l
DUMMY_NUM_Reset−Allg BefRahmen E82Zx_EN
0Fig. 0Tab. 0
1 Preface and general information
These Instructions
ƒ describes the mounting with thermal separation (push−through technique) and
contains further dimensions
ƒ are only valid
– for frequency inverters 8200 vector E82DVxxxKxC in the power range
0.25 ... 2.2 kW
– together with the Mounting Instructions EDK82EV222.
Description
The mounting material is used for a safe mounting of the controller with thermal
separation.
The heat sink of the controller is located outside the control cabinet.
Items supplied
1 frame, consisting of two parts
1 seal
2 grounding clamps