Key for overview, Interfaces and displays – Lenze E82xV903Kxxxxx User Manual
Page 5
![background image](/manuals/566041/5/background.png)
Key for overview
Position
Description
0
Frequency inverter
1
Fixing bracket for standard mounting
2
Blind covers (2 items) for the FIF I and FIF II interfaces
3
EMC shield sheet with fixing screws for shielded control cables
4
Cover with fixing screws
5
Shield clamp and strain relief for the motor cable
6
Strain relief for the protective earth cable of the motor and the incoming cable of the motor temperature
monitoring with PTC thermistor (PTC) or thermal contact (NC contact)
T1, T2
Connection for PTC or thermal contact (NC contact) of the motor
U, V, W, PE
Motor connection
L1, L2, L3, PE
+U
G
, −U
G
Mains connection, DC supply
X1.2
Terminal strip for connection of relay output K1
X1.3
Terminal strip for connection of relay output K2
X3.1
Terminal strip for connection of relay output K
SR
for "safe standstill" (for Bx4x variant only)
Interfaces and displays
Position
Description
Function
2 light−emitting diodes (red, green)
Status display
AIF interface
(automation interface)
Slot for communication module
e. g. E82ZBC keypad
FIF I interface
(f
i
i
f
)
With cover for operation without function module
(function interface)
or slot for function module
FIF II interface
(f
f
)
With cover for operation without function module
(function interface)
or slot for function module