Lenze EZN3x0060H054 - Manual (Page 37)

Electrical installation
Mounting steps
4
l
37 EDKZNXXXX−003 DE/EN/FR 1.0
4.4 Mounting steps
Design 1
ƒ EZN3A0060H054
EZNx035a
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "Load"
2 to the basic device.
– Observe the mounting instructions for the standard device!
3. Mount the PE conductor to the PE stud
1 using the ring cable lug.
– Observe tightening torque!
4. Connect the mains cables to screw terminal "Line"
0.
– Observe tightening torque!