Lenze ECSZS000X0B - Manual (Page 17)

Mounting supply module ECSxE
Control cable/system bus cable
EDKCSZS000 DE/EN/FR 4.1
17

H2_Netzltg_ext_BWltg_EN-ECSCS000_ECSXE_Steuerrltg_Sysbusltg_BL_EN
Control cable/system bus cable
Mounting the wire clamps Connecting the shield
6
7
ecs083 ecs084
 Screw the wire clamps for the shield
connections of the control cable and the
system bus cable tightly onto the supply
module using a 3 mm Allan key.
 Press the wire clamps for the shield
connections of the control cable and the
system bus cable down using a screw driver
(3 mm blade).
Place the cables under the wire clamps.
Remove the screw driver.