Lenze E70ACxS Application Sample i700 (PLC Designer v3) - Manual (Page 30)

Getting started - operating the Application Sample
EtherCAT diagnostics: "Diagnostic"
30
Lenze · Servo Inverter i700 | Application Sample · DMS 1.0 EN - 09/2012 - TD11
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.9 EtherCAT diagnostics: "Diagnostic"
The Diagnostic visualisation displays information on the EtherCAT state:
• State EtherCAT bus
... displays the current state of the bus. It shows e.g. whether the bus has been
restarted after the communication to the slaves was interrupted (disconnected cable
connection between Controller and node).
• State EtherCAT slaves
• ... displays the state of the corresponding slave.
• Set Slave State serves to set the desired state for the corresponding slave.