11 trimming, 9400 technology applications | electronic gearbox – Lenze E94AxHE Technology Application Electronic gearbox User Manual
Page 77
EDS94TA10030xxxx EN 1.2 - 11/2009
L
77
9400 Technology applications | Electronic gearbox
Parameter setting & configuration
Parameterisable function blocks
5.16.11
Trimming
Is an instance of
Function
L_LdMPot
Parameter
Possible settings
Information
C03685
-214000.0000
unit/t
214000.0000 Positive speed
• Initialisation:
400.0000 units/t
C03686
-214000.0000
unit/t
214000.0000 Negative speed
• Initialisation:
-200.0000 units/t
C03687
0.001
s
130.000 Acceleration ramp
• Initialisation: 1.000 s
C03688
0.001
s
130.000 Deceleration ramp
• Initialisation: 1.000 s
C03689
0.001
s
130.000 Ramp for motor potentiometer off
• Initialisation: 1.000 s
C03690
-214748.3647
unit
214748.3647 Speed at the output
• Read only
• Is generated from the speed
signal dnSpeedOut_s.
C03691
Character string
Speed unit
• Read only
C03692
-214748.3647
unit/t
214748.3647 Reference speed
• Read only
• Reference value for selecting
speeds.