Longevity FORCECUT 50i - Manual (Page 19)

Plasma Cutters www.LWELD.com
www.longevity-inc.com 15
Assembly of Plasma Torch:
The plasma cutter torch handle is made of fire and heat resistant materials. Avoid
dropping the torch or striking anything with it. Assemble the consumables as
pictured above, and described below.
1. Insert the electrode. Tighten it with pliers.
2. Seat the swirl ring on the electrode.
3. Place the copper tip on the ring, ensuring that is seated flat.
4. Place the shield cup over the tip and secure. Secure all parts into place by
turning the ceramic cup clockwise until it is snug. Do not over tighten.