Handle installation – MARVEL Scientific 25CM User Manual

Page 5

Advertising
background image

Figure 3

• Do not splash or spray water from a hose on the ice ma-

chine! Doing so may cause an electrical shock, which may

result in severe injury or death.

• This unit should not, under any circumstances, be installed

to an un-grounded electrical supply.

Grounding Method

This product is factory equipped with a power supply cord that

has a three-pronged, grounded plug. It must be plugged into a

mating grounding type receptacle in accordance with the Na-

tional Electrical Code and applicable local codes and ordinances

(see Figure 3). If the circuit does not have a grounding type re-

ceptacle, it is the responsibility and obligation of the customer to

provide the proper power supply. The third ground prong should

not, under any circumstances, be cut or removed.

Electrical Connection

A 115 volt, 15 amp dedicated circuit is required. A 3 prong

grounded receptacle is required.

The unit must be installed according to your local building codes

and ordinances.

Do not use an extension cord with

this appliance.

HANDLE INSTALLATION

Handle Installation (Solid Door Models)

1. Remove the handle, (2) screws, and 5/32” allen wrench from

the bag shipped inside the cabinet.

2. Locate handle opposite the hinges and secure in place using

the (2) screws and the allen wrench. (See Figure 4).

Screws

Handle

Figure 4

Right hand hinged

door shown

Door Reversal

It is possible to reverse the door (change from right hand swing

to left hand swing or vice versa) if you wish. To do so it will be

necessary to order one of the service kits below.

Hinge Color

Door Color

Right Hand

Left Hand

Chrome

Black

42247595

42247599

Chrome

White

42247639

42247640

Black

Black

42247596

42247600

White

White

42247597

42247601

Stainless

Steel

Stainless

Steel

42247598

42247602

5

Advertising
This manual is related to the following products: