Billion Electric Company BIPAC 8500 - Manual (Page 33)

Billion BIPAC-8500 / 8520 SHDSL VPN Firewall Bridge / Router
Chapter 4: Configuration
Configuration
When you click this item, you get following sub-items to configure the SHDSL router.
LAN, WAN, System, Firewall, VPN, QoS, Virtual Server
and Advanced
These functions are described below in the following sections.
LAN (Local Area Network)
There are four items within the LAN section: Ethernet, Port Setting and DHCP Server.
Ethernet
The router supports two Ethernet IP addresses in the LAN, and two different LAN subnets
through which you can access the Internet at the same time. Users usually only have one
subnet in their LAN, so there is no need to configure a Secondary IP address. The default
IP address for the router is 192.168.1.254.
RIP:
RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
The Subnet mask of Secondary IP Address depends on the setting of
Primary IP Address.
29