Metal Sales Vertical Seam Manual - Manual (Page 6)

Construction No. 254
February 05, 2002
Uplift - Class 90
(See Item No. 4)
Fire Not Investigated
Underwriters Laboratories Inc. ®
UL
®
LISTED
1. Metal Roof Deck Panels * No. 22 MSG or No. 24 MSG min thickness coated steel panels. Panels 12 in. wide, 1-3/4 in.
high at the ribs. Panels continuous over two or more spans. A bead of sealant may be used at panel side joints.
METAL SALES MANUFACTURING CORPORATION - “Vertical Seam”
2. Roof Deck Fasteners * (Panel Clips) One piece assembly, 3-1/2 in. wide, 1-7/8 in. high, thickness 0.048 in. One panel
clip located at each purlin intersection.
METAL SALES MANUFACTURING CORPORATION - “Vertical Seam Clip”
3. Panel Fasteners (Screws) Fasteners used to attach panel clips (Item 2) to purlins to be No. 10-16 by 1 in. long No. 3 self-
drilling point, No. 2 Phillips drive head, plated steel screws. Two screws per clip to be used inserted through 1/4 in. diameter
guide holes.
4. Purlins No. 16 MSG min thickness steel (50,000 psi min yield strength).
Spacing - For 22 MSG thickness panels - 60 in. OC
For 24 MSG thickness panels - 48 in. OC
PVS-6
VERTICAL SEAM
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
2
1
4
3
4
2 1
4
3
3
2
1
4
2
1
See Item 4
Ul 580 w
ind
U
PlifT
i
nformaTion
VERTICAL SEAM